FLOOR
MAINTENANCE EQUIPMENT
Please click the thumbnails to know about
the products
DC
Series Ultra Speeds
There is simple nothing like the results obtained with these
ultra speed machines as compared with standard speed machines
when used with the modern thermo-plastic finishes –
the results are a glassy, wet look that lasts under the toughest
conditions and is easily maintained. As a result of the ultra
speed, less material is used, the time is cut to a fraction
and the finish is easily superbly balanced to produce vibration-free
performance. Model 2000DC-4 has a built-in light, which indicated
amperage draw and monitors brush pressure adjustments.
• Excellent design and close tolerance machining result
in a superior brush pulley – the heart of any ultra
speed
• Non-marking, wrap around bumper
• All surfaces highly polished aluminum or chrome plated
steel
• 50’ 3 wire, special low temperature, vinyl jacketed
cable, type ST with molded plug
• Motors - DC rectified (plug into AC outlet), permanent
magnet 1½ h.p.
• Safety switch levers
• “Grip-Notch” belt drive
• Spike load protectors
• 4 wheels for easy transportation
• Two year Power Train warranty
SPECIFICATIONS
| MODEL |
2000DC |
2000DC-1 |
2000DC-4 |
| Motor |
1½ h.p. Rectified
DC perm. mag. |
1½ h.p. Rectified
DC perm. mag. |
1½ h.p. Rectified
DC perm. mag. |
| Running Amperage |
13.5 amps. |
13.5 amps. |
Min 17 amps. |
| Recommended Pad size |
20” |
20” |
20” |
| Weight |
90 lbs. |
90 lbs. |
94 lbs. |
| Cable |
50’ 14x3 |
50’ 14x3 |
50’ 14x3 |
| Pad Speed |
1100 |
1500 |
2000 |
|
BUILT-IN LIGHT on model 2000DC-4 allows you to monitor the
amperage draw during operation. Front caster can be adjusted
for pad pressure to keep within available electric current.
|
